
WikiPrint - from Polar Technologies
22
aux polllen n
Note: Should use aux len if using FW 2.0.5.3358 or higher
This command sets the amount of bytes to read for [mode 23] (Generic auxiliary interface).
Responses greater than the configured length will be split over multiple packets.
n = 0 to 205 Bytes to read, must be greater than 0 for mode 23 to work (Default 205)
Examples:
1. Set the bytes to read to 88 for CS-440 device :
cmd aux polllen 88
See also: [Salt Reports]
Firmware revision 2.0.5.3101
Comentários a estes Manuais