
WikiPrint - from Polar Technologies
141
iolocip n iii.iii.iii.iii
Sets the IP address of the local server that the IO report will be sent to. Up to 8 IO reports can be configured.
n = 1 to 8 IO report number
iii.iii.iii.iii = 0.0.0.0 to 255.255.255.255 local IP address in decimal (default: 192.168.1.20)
Notes:
• firmware 3396 and later can broadcast local UDP messages.
Examples:
1. Report #1 will be sent to local IP address 192.168.1.21 :
cmd iolocip 1 192.168.1.21
2. Report #2 will be broadcasted on the local 192.168.1.0/24 subnet (firmware 3396 and later) :
cmd iolocip 2 192.168.1.255
See also: [IO Reports]
Firmware revision R1.3.0.1967
Comentários a estes Manuais