
WikiPrint - from Polar Technologies
146
iorep n l r s
Sets the reporting type for each IO report for the local and remote servers.
n = 1 to 8 IO report number
l = 0 disables the local report (default)
l = 1 asynchronous NMEA or ULCP messages over RS232
l = 2 asynchronous NMEA or ULCP messages with a ULCP header over RS232
l = 3
in-band NMEA or ULCP messages in a UDP Packet over Ethernet
Firmware 3211 and below
l = 3
in-band NMEA or ULCP messages with a ULCP header and in individual
UDP packets over Ethernet Firmware 3232 and above
l = 4
in-band NMEA or ULCP messages with a ULCP header and in individual
UDP packets over Ethernet sent in binary format only
l = 5
in-band NMEA or ULCP messages in a TCP Packet over Ethernet
Firmware 3211 and below
l = 5
in-band NMEA or ULCP messages with a ULCP header in individual TCP
Packets over Ethernet Firmware 3232 and above
l = 6 file-based reports
r = 0 disables the remote report (default)
r = 3
in-band NMEA or ULCP messages in a UDP Packet Firmware 3211 and
below
r = 3
in-band NMEA or ULCP messages with a ULCP header and in individual
UDP packets Firmware 3232 and above
r = 4
in-band NMEA or ULCP messages with a ULCP header and in individual
UDP packets in binary format only
r = 5
in-band NMEA or ULCP messages in a TCP Packet Firmware 3211 and
below
r = 5
in-band NMEA or ULCP messages with a ULCP header in individual TCP
Packets Firmware 3232 and above
r = 6 email reports
r = 7 SMS reports
s = 0 disables the store and forward of IO reports
s = 1 enables the store and forward of IO reports
Notes:
• For r = 7 (SMS reports), the total length of the report must not exceed 166 characters including <CR> and <LF>
• A remote report cannot be configured when using l = 6 (File-based reporting).
Examples:
1. send IO report #4 as a UDP packet over Ethernet and over the wireless link :
cmd iorep 4 3 3
2. send IO report #2 as a UDP packet over Ethernet and as an SMS message to the SMS destination set using the [iosms] command, and enable the
store and forward :
cmd iorep 2 3 7 1
3. send IO report #5 as a TCP packet over the wireless link :
cmd iorep 5 0 5
Comentários a estes Manuais