Cypress Chameleon CTM-15X Especificações Página 93

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 187
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 92
© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
93
Command Reference
The current OBDII transmitter protocol can be queried by using the obdsp command without parameters.
Note that option 0 (Automatic) only replaces OBD2 protocol options 1-9. Some vehicles may exhibit
problems with automatic protocol discovery. obdsp must specifically be set to match the protocol on
those vehicles.
Examples:
1. Set the OBDII transmitter to use the J1939 protocol
cmd obdsp 10
OK
2. Query the current OBDII transmitter protocol
cmd obdsp
cmd obdsp 7
OK
A cmd save and a power cycle are required for this command to take effect.
return to list of commands
odometer n
Sets/queries the GPS odometer.
The GPS odometer keeps track of the distance travelled in km by using GPS position data. If n is omitted,
the current value of the GPS odometer will be queried.
The maximum odometer value is 1999999 km. The odometer will roll over to 0 km when the current
odometer value exceeds the maximum.
The GPS odometer is reset to 0 km whenever one of these cases applies:
(i) n is specified as reset
(ii) n is specified as 0
(iii) cmd factory is issued.
Examples:
1. Reset the GPS odometer value to 0
cmd ctm15x
OK
cmd odometer reset
OK
2. Reset the GPS odometer value to 0
Vista de página 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 186 187

Comentários a estes Manuais

Sem comentários