Cypress Chameleon CTM-15X Especificações descarregar pdf (Página 182)

Open CTM (Revision D)

182

ULCP Remote Configuration Messages

Parameter

Length

script-name

0 to W bytes

delimeter1

1 byte - 0x2C(,)

url

1 to X bytes

delimeter2

1 byte - 0x2C(,)

username

0 to Y bytes

delimeter3

1 byte - 0x2C(,)

passwd

0 to Z bytes

Where the sum of W, X, Y and Z is not over 252 to make 0xLL not exceed the maximum, 0xFF.

If the command was not successful then no response is sent.

Response header: 0x5E 0xSS 0x03 0x00 0x00 0xLL 0xNNNN

Where NNNN is the password.

Response message body: the message body as defined above

12.2.10 Trigger Reports

Request header: 0x5F 0xSS 0x02 0x00 0x00 0xLL 0x0000

Where 0xLL is in the range of 0x10 to 0x14 depending on the number of the message list.

Request message body:

Hex

Description

2 bytes

1st report number

2 bytes

2nd report number

2 bytes

3rd report number

2 bytes

4th report number

2 bytes

5th report number

2 bytes

6th report number

2 bytes

7th report number

2 bytes

8th report number

0 to 4 bytes

Message list: up to 4 messages may be specified. Append these messages to the reports.

where report number is between 1 and 999.

If the command was not successful then no response is sent.

Response header: 0x5F 0xSS 0x03 0x00 0x00 0xLL 0xNNNN

Where NNNN is the password.

Response message body: the message body as defined above

Note 1: Appending NMEA messages to reports using this command when reports are configured using

either remote reporting types r = 3 (in-band NMEA or ULCP messages in a UDP Packet), or r = 4 (in-band

NMEA or ULCP messages with a ULCP header and in individual UDP packets) is supported.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187

Comentários a estes Manuais

Sem comentários

Cypress Chameleon CTM-15X Especificações Página 182

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cypress Chameleon CTM-15X