Cypress Chameleon CTM-15X Especificações descarregar pdf (Página 127)

Open CTM (Revision D)

127

Command Reference

A cmd apply followed by a cmd save are required for this command to take effect.

return to list of commands

rmttelnet

This command configures the modem to respond to incoming telnet commands over the wireless

network.

The modem must be connected to a wireless network.

n=0 remote telnet = disabled (default)

n=1 remote telnet = enabled

The current state of remote telnet setting can be queried by using the rmttelnet command without

parameters.

Examples:

cmd rmttelnet 1 sets the modem to respond to incoming telnet commands

cmd rmttelnet queries the modem’s setting for remote telnet access

A cmd apply followed by a cmd save are required for this command to take effect..

return to list of commands

rmtweb n

Enables or disables remote access to the embedded web server feature of the modem.

If enabled, it will be possible to access the modems embedded web pages by using the current IP address

allocated to the modem by the network.

n = 0 remote access = disabled (default)

n = 1 remote access = enabled

The current status of remote web server access can be queried by using the rmtweb command without

parameters.

Examples:

cmd rmtweb 1 enables remote access to the modem’s web pages

cmd rmtweb queries the current status of remote web

A cmd apply followed by a cmd save are required for this command to take effect.

return to list of commands

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 186 187

Sem comentários

Cypress Chameleon CTM-15X Especificações Página 127