Cypress Chameleon CTM-15X Especificações descarregar pdf (Página 44)

Open CTM (Revision D)

Command Reference

After 5 reconnects have been attempted every 30 secs, and the modem still gets an invalid DNS, the

modem will stop disconnecting and reconnecting the network connection.

x = 0 disable checking for valid DNS IP addresses from the carrier

x = 1 enable checking for valid DNS IP addresses from the carrier (default)

Examples:

1. Disable checking DNS IP addresses from the carrier.

cmd dnscheck 0

A cmd save and a power cycle are required for this command to take effect.

return to list of commands

dout n x

This command is used to set the state of each of the all outputs. There are four outputs in total.

n = 1 to 4 output channel number

x = 0 sets output to off

x = 1 sets output to on

The current settings can be queried by using the dout command without parameters.

Examples:

1. Set output #2 ON

cmd dout 2 1

2. Query the state of all four outputs

cmd dout

cmd dout 1 0

cmd dout 2 1

cmd dout 3 0

cmd dout 4 0

A cmd save is required for this command to take effect.

return to list of commands

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 186 187

Sem comentários

Cypress Chameleon CTM-15X Especificações Página 44