Cypress Chameleon CTM-15X Especificações descarregar pdf (Página 23)

Open CTM (Revision D)

Connecting to a CTM-15X Modem Locally

5.3 Browser

Open an internet browser and enter the address:

http://192.168.1.1

The browser will redirect to a web page requiring a username and password.

At the login prompt, type in admin (default user name). At the password prompt type in Chameleon

(default password, case sensitive).

After successful login you will have access to a web browser based configuration.

Notes:

Not all device functionality is supported by the web browser interface. To access all device

commands please use the command line interface.

The embedded web server can only be used with a single client session at any time.

Only 1 I/O input signal can be set from the embedded web page.

Both GPS and IO report web pages are limited and cannot set all conditions, including minimum

time between reports.

5.4 Serial

With the device powered up and connected directly to a PC or Laptop with a serial cable, start up a

terminal emulation program such as Windows HyperTerminal or similar application.

Configure the terminal emulation program with the following parameters:

Data rate: 115,200 baud

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Note: The above settings are the device default settings; they can be configured using the cmd port

command.

Press the Enter key to return the # prompt:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 186 187

Sem comentários

Cypress Chameleon CTM-15X Especificações Página 23