Cypress CY7C1245V18 Manual do Utilizador Página 12

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 28
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 11
CY7C1241V18, CY7C1256V18
CY7C1243V18, CY7C1245V18
Document Number: 001-06365 Rev. *D Page 12 of 28
Write Cycle Descriptions
The write cycle description table for CY7C1245V18 follows.
[2, 10]
BWS
0
BWS
1
BWS
2
BWS
3
K K Comments
LLLLLHDuring the data portion of a write sequence, all four bytes (D
[35:0]
) are written
into the device.
LLLLLHDuring the data portion of a write sequence, all four bytes (D
[35:0]
) are written
into the device.
L H H H L–H During the data portion of a write sequence, only the lower byte (D
[8:0]
) is
written into the device. D
[35:9]
remains unaltered.
L H H H L–H During the data portion of a write sequence, only the lower byte (D
[8:0]
) is
written into the device. D
[35:9]
remains unaltered.
H L H H L–H During the data portion of a write sequence, only the byte (D
[17:9]
) is written
into the device. D
[8:0]
and D
[35:18]
remain unaltered.
H L H H L–H During the data portion of a write sequence, only the byte (D
[17:9]
) is written
into the device. D
[8:0]
and D
[35:18]
remain unaltered.
H H L H L–H During the data portion of a write sequence, only the byte (D
[26:18]
) is written
into the device. D
[17:0]
and D
[35:27]
remain unaltered.
H H L H L–H During the data portion of a write sequence, only the byte (D
[26:18]
) is written
into the device. D
[17:0]
and D
[35:27]
remain unaltered.
H H H L L–H During the data portion of a write sequence, only the byte (D
[35:27]
) is written
into the device. D
[26:0]
remains unaltered.
H H H L L–H During the data portion of a write sequence, only the byte (D
[35:27]
) is written
into the device. D
[26:0]
remains unaltered.
HHHHLHNo data is written into the device during this portion of a write operation.
HHHHLHNo data is written into the device during this portion of a write operation.
[+] Feedback [+] Feedback
Vista de página 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentários a estes Manuais

Sem comentários