Cypress CY7C1223H Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Cypress CY7C1223H. Cypress CY7C1223H User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 16
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
2-Mbit (128K x 18) Pipelined DCD Sync SRAM
CY7C1223H
Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600
Document #: 38-05674 Rev. *B Revised February 6, 2006
Features
Registered inputs and outputs for pipelined operation
Optimal for performance (Double-Cycle deselect)
Depth expansion without wait state
128K × 18-bit common I/O architecture
3.3V core power supply
3.3V/2.5V I/O supply
Fast clock-to-output time
3.5 ns (for 166-MHz device)
4.0 ns (for 133-MHz device)
Provide high-performance 3-1-1-1 access rate
User-selectable burst counter supporting Intel
®
Pentium
®
interleaved or linear burst sequences
Separate processor and controller address strobes
Synchronous self-timed write
Asynchronous Output Enable
Offered in JEDEC-standard lead-free 100-pin TQFP
package
“ZZ” Sleep Mode option
Functional Description
[1]
The CY7C1223H SRAM integrates 128K x 18 SRAM cells with
advanced synchronous peripheral circuitry and a two-bit
counter for internal burst operation. All synchronous inputs are
gated by registers controlled by a positive-edge-triggered
Clock Input (CLK). The synchronous inputs include all
addresses, all data inputs, address-pipelining Chip Enable
(CE
1
), depth-expansion Chip Enables (CE
2
and CE
3
), Burst
Control inputs (ADSC
, ADSP, and ADV), Write Enables
(BW
[A:B]
and BWE), and Global Write (GW). Asynchronous
inputs include the Output Enable (OE
) and the ZZ pin.
Addresses and chip enables are registered at rising edge of
clock when either Address Strobe Processor (ADSP
) or
Address Strobe Controller (ADSC
) are active. Subsequent
burst addresses can be internally generated as controlled by
the Advance pin (ADV
).
Address, data inputs, and write controls are registered on-chip
to initiate a self-timed Write cycle.This part supports Byte Write
operations (see Pin Descriptions and Truth Table for further
details). Write cycles can be one to two bytes wide as
controlled by the byte write control inputs. GW
active LOW
causes all bytes to be written. This device incorporates an
additional pipelined enable register which delays turning off
the output buffers an additional cycle when a deselect is
executed.This feature allows depth expansion without penal-
izing system performance.
The CY7C1223H operates from a +3.3V core power supply
while all outputs operate with either a +3.3V/2.5V supply. All
inputs and outputs are JEDEC-standard JESD8-5-compatible.
Selection Guide
166 MHz 133 MHz Unit
Maximum Access Time 3.5 4.0 ns
Maximum Operating Current 240 225 mA
Maximum CMOS Standby Current 40 40 mA
Note:
1. For best-practices recommendations, please refer to the Cypress application note System Design Guidelines on www.cypress.com.
[+] Feedback
Vista de página 0
1 2 3 4 5 6 ... 15 16

Resumo do Conteúdo

Página 1 - CY7C1223H

2-Mbit (128K x 18) Pipelined DCD Sync SRAMCY7C1223HCypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600Docu

Página 2

CY7C1223HDocument #: 38-05674 Rev. *B Page 10 of 16 Switching Characteristics Over the Operating Range [14, 15]Parameter Description166 MHz 133 MHz

Página 3

CY7C1223HDocument #: 38-05674 Rev. *B Page 11 of 16Switching Waveforms Read Timing[16]Note: 16. On this diagram, when CE is LOW, CE1 is LOW, CE2 is HI

Página 4

CY7C1223HDocument #: 38-05674 Rev. *B Page 12 of 16Write Timing[16, 17]Note: 17.Full width write can be initiated by either GW LOW; or by GW HIGH, BWE

Página 5

CY7C1223HDocument #: 38-05674 Rev. *B Page 13 of 16Read/Write Timing[16, 18, 19]Notes: 18. The data bus (Q) remains in High-Z following a Write cycle,

Página 6 - Truth Table

CY7C1223HDocument #: 38-05674 Rev. *B Page 14 of 16ZZ Mode Timing [20,21]Notes: 20. Device must be deselected when entering ZZ mode. See truth table f

Página 7

CY7C1223HDocument #: 38-05674 Rev. *B Page 15 of 16© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change w

Página 8 - Maximum Ratings

CY7C1223HDocument #: 38-05674 Rev. *B Page 16 of 16Document History PageDocument Title: CY7C1223H 2-Mbit (128K x 18) Pipelined DCD Sync SRAMDocument N

Página 9 - AC Test Loads and Waveforms

CY7C1223HDocument #: 38-05674 Rev. *B Page 2 of 16Logic Block DiagramADDRESSREGISTERADVCLKBURSTCOUNTER ANDLOGICCLRQ1Q0ADSCBWBBWACE1DQB, DQPBBYTE WRITE

Página 10 - [+] Feedback

CY7C1223HDocument #: 38-05674 Rev. *B Page 3 of 16 Pin Configurations 100-pin TQFP PinoutANCNCVDDQVSSQNCDQPADQADQAVSSQVDDQDQADQAVSSNCVDDZZDQADQAVDDQVS

Página 11 - Switching Waveforms

CY7C1223HDocument #: 38-05674 Rev. *B Page 4 of 16Pin Descriptions Pin Type DescriptionA0, A1, A Input-SynchronousAddress Inputs used to select one of

Página 12 - (continued)

CY7C1223HDocument #: 38-05674 Rev. *B Page 5 of 16Functional OverviewAll synchronous inputs pass through input registers controlledby the rising edge

Página 13 - Read/Write Timing

CY7C1223HDocument #: 38-05674 Rev. *B Page 6 of 16 Interleaved Burst Address Table (MODE = Floating or VDD)First AddressA1, A0SecondAddressA1, A0T

Página 14 - ZZ Mode Timing

CY7C1223HDocument #: 38-05674 Rev. *B Page 7 of 16Truth Table for Read/Write[2, 3]Function GW BWE BWABWBRead H H X XRead H L H HWrite byte A - (DQA an

Página 15

CY7C1223HDocument #: 38-05674 Rev. *B Page 8 of 16Maximum Ratings(Above which the useful life may be impaired. For user guide-lines, not tested.)Stora

Página 16

CY7C1223HDocument #: 38-05674 Rev. *B Page 9 of 16Capacitance[9]Parameter Description Test Conditions100 TQFP Max. UnitCIN Input Capacitance TA = 25°C

Comentários a estes Manuais

Sem comentários