Cypress Chameleon CTM-15X Manual do Utilizador descarregar pdf (Página 15)

15 Technical Support/Warranty

cmd padmode 4/5 PAD client, persistent mode: 4 = UDP, 5 = TCP

cmd padip 200.100.1.1 Sets IP address of remote server handling data reported by the field device

cmd padport 8000 Sets port to which data is to be sent

cmd padecho 0 Do not echo data sent by the field device back on the serial port

cmd padfwdc 13 Decimal value of ASCII <CR> (default setting, in effect after cmd factory)

cmd padfwdl 40 Data to be sent over the air in 40-byte packets or less if <CR> in first 40 bytes

(default setting, in effect after cmd factory)

cmd padfwdt 20 Sets the forwarding time to 1 second idle period

(default setting, in effect after cmd factory)

cmd padsvct 15 0 Set connection timeout to 15 seconds, maximum connection timer is disabled

(default settings, in effect after cmd factory)

cmd save Save configuration to modem’s non-volatile memory

cmd pwrmode 2 Power cycle

6 Technical Support/Warranty

Cypress Solutions Service

Support Group

1.877.985.2878 or 604.294.4465

9.00am to 5.00pm PST

support@cypress.bc.ca

1 2 ... 10 11 12 13 14 15

Sem comentários

Cypress Chameleon CTM-15X Manual do Utilizador Página 15